Published: 17th April 2023 | Author: Tanya Russell
How Foundry Bronze Sculptures are Made
Here is photographic guide of the process of making a foundry bronze metal sculpture, from the very start, to the very finish!
1. Cob horse sculpture armature in copper wire
2. Modelling wax is applied to the armature to create the sculpture, stage 1
3. Cob horse sculpture modelling, stage 1/1
4. Cob horse sculpture modelling, stage 1/2
5. Cob horse sculpture modelling, 2/1
6. Cob horse sculpture modelling, stage final 1
7. Cob horse sculpture modelling, final 2
8. A rubber silicon mould is taken from the sculpture
9. A hollow casting wax positive is taken from the mould
10a. The wax sculpture is cut into sections and wax runners for pouring the molten bronze are fixed to the sculpture
10b. The wax sculpture is cut into sections and wax runners for pouring the molten bronze are fixed to the sculpture
11a. Ceramic shell is put over the wax model to form a hot cast mould
11b. Ceramic shell is put over the wax model and inside to form a hot cast mould
11c. Ceramic shell is put over the wax model and inside to form a hot cast mould
12. The wax is melted out and the hot molten bronze poured into the cavity through the runners
13. Once cooled down, the ceramic shell is chipped away from the bronze cast
14. The bronze cast is cleaned up and the sections welded back together
15. The cast is prepared for patination, the chemical colouring that gives it the tradional bronze look
16. The piece is patinated.
17. Finished Bronze Sculpture
How Bronze Resin Sculptures (Cold Cast Bronze) are Made
The process called Bronze Resin casting, cold casting or bonded casting is similar up to stage 8 above – the moulding of the original sculpture with a silicone rubber mould. But because this casting process is ‘cold’ that first rubber mould can be used to make a resin casting, removing the need to create a second, single-use, heat-resistant ceramic mould, as in foundry bronze casting.
Bronze Resin casting provides the look and feel of a hot foundry pour or other materials for far less in cost and time. It is based around the principle of mixing a liquid bonding agent with a finely ground powder of bronze metal, creating extraordinary castings that mimic foundry bronze metal.
The liquid bonding agent, typically a polyurethane resin, is mixed with the bronze powder to create a heavy slurry of resin and bronze powder, which is poured into a mould, partially filling it. The mould is then slowly rotated, usually by hand, allowing the mix to evenly coat the interior of the mould. As it hardens, the aim is to form a bubble free exterior face coat on the cast.
That ‘wall’ can be thickened with additional pours, or a solid cast can be created using a filler material, like resin and stone dust (aiding longevity of the casting when exhibited outdoors). We use a solid pour, generally recycled marble dust, as this helps protect against cracking damage from expansion and contraction when a sculpture is exposed to the weather cycle outdoors.
The resin casting is hand finished, often using grinders or dremels, and the application of additional resin slurry, to conceal seam-lines and recover any of the artists mark-making lost in casting process. The bronze on the surface of the sculpture can then be activated with a brass brush or steel pad, prior to application of a protective layer of wax. The wax, similarly to a piece of outdoor furniture, will help protect the bronze colours against the weather, and can be reapplied periodically, usually following a good clean.
The bronze resin casting process is many times more economical and faster than a traditional cast bronze above, and it is not limited to bronze. Almost any finely ground material can be used to create a bonded casting. Typical applications have included marble or iron (for a white, or a rusty orange finish respectively.
Explore Related ArticlesÂ
Can Bronze Withstand the Weather? Displaying Bronze Statues Outdoors
Broadly yes, many bronze sculpture owners choose to display their bronze outside, and foundry bronze can last indefinitely. This is because it’s a strong and durable material that can hold up extremely well in various outdoor weather conditions.
How To Know If Your Bronze Sculpture is Real
To identify genuine bronze, it is helpful understand what real bronze is composed of, so you can spot materials pretending to be bronze. It is helpful to know how artists normally certify their work as real. And it is helpful to know where to look on the statue itself to identify if your bronze sculpture is really authentic or not.
Our Sculpture Security Recommendations: Securing Outdoor Statues
When considering sculpture security, it is important to recognise that it is nearly impossible to guarantee prevention of theft. If the thief is determined, takes risks, plans ahead, brings power tools or even heavy machinery and remains undisturbed during the theft, they may succeed despite prevention measures.
Tanya Russell MRBS
Bronze Sculptor
Tanya Russell has become well known over the last 30 years for her life-like and vibrant animal sculptures.
Having apprenticed for 7 years with her parents, sculptors Lorne McKean FRBS and Edwin Russell FRBS and after practicing as a sculptor for a number of years, she founded the The Art Academy in London Bridge, now a thriving art college. She has completed many public and private commissions nationally and internationally.
For Tanya, her practice is not only about capturing the animals she sculpts with marks and movement. It’s about our relationships with those animals and their welfare.
Follow The Artist
Keep up to date with Tanya's latest work!