Labrador Pair sculpture

The Labrador Pair sculpture by Tanya Russell, MRBS. Limited edition, from the ‘Affection’ sculpture range. Handmade in England. Can be bought separately.


Pair of Labradors - dog sculpture

Pair of Labradors

Material: either Bronze Resin or Foundry Bronze

Limited Edition 25 – Bronze Resin Pair of Labradors £3,040.

Limited Edition 25 – Foundry Bronze Pair of Labradors £17,950.

(Prices include VAT and exclude delivery)



Individual Sitting LabradorSize: H:800 W:780 D:300 mm, H:32 W:31 D:12 inches

Individual Standing LabradorSize: H:780 W:1200 D:300 mm, H:31 W:47 D:12 inches


To purchase this Labrador Pair sculpture please contact the artist. As this artwork is handmade colour can vary slightly.

Materials explained

Bronze Resin (known also as Cold Cast Bronze) is made from a polyester epoxy resin with real bronze powder mixed into the surface layer. The final product is patinated (a term that describes the reaction of chemicals with the bronze powder in the surface) to give it a very similar colour to foundry bronze.

Foundry Bronze is made from molten metal using the lost wax method. Bronze metal is a blend of copper and tin along with other metals to give different characteristics to the final product.

Both forms begin as a clay or wax sculpture, from which a mould is taken, but Foundry Bronze casting is a costly and time-consuming process. Cold Casting allows for faster production and a more affordable sculpture.

The intention behind the Labrador Pair sculpture

For many years an opportunity to commission a dog sculpture from me was auctioned at Battersea Dog and Cats Home’s annual fundraiser. I modelled these labradors Barney and Leo for the generous winning bidder. They were very lively and affectionate and spent quite a lot of the time sitting on top of the garden table.

At their sitting I took lots of photographs of Barney and Leo in a variety of poses, watching their expressions and mannerisms, and hearing about the way they behaved at home with their family. After that, with their owners, I decided which pose would suit Barney and Leo best, then proceeded to model them in clay.

Once I’d sculpted the labradors a rubber mould was taken, with ‘keys’ placed in the rubber to ensure proper positioning. Then a shell of fibreglass was applied, to protect the mould and support it during the casting process.